Tracs UK
home
about us
courses & coaching
fun & activities
costs & kit
workshop facilities
Bike Shop
calendar
faq
links & partners
location & map
comments
terms & conditions
Cycle scheme


Workshop Facilities

All of our service and repair work is carried out by Cytech qualified technicians in our fully equipped workshop.

Basic Service/ Safety Inspection (Pre Delivery Inspection PDI): £25.00
The general safety check includes the setting up of both brakes and gears plus correct adjustment. Includes correct torque of all nuts and bolts. (parts extra)

Standard Service: £40.00
Inspection for wear or damage and replace any parts if necessary. Set up of brakes and gears, adjust hubs and headset, undertaking any truing of wheels, check and tighten up nuts/bolts to specified torque. Clean / de-grease and lubricate chain together with gear and brake cables.(parts extra)

Deluxe / Full Service: £80.00
Bike disassembled and rebuilt. Gear and brake cables replaced, hydraulic brake bleed and wheels re-tensioned / trued. Adjust and re-grease hubs / headset / bottom bracket. Adjust brakes and gears and tighten all nuts and bolts to required torque. Clean/de-grease / lubricate and re-build drive train. (parts extra)

Adjustment / Service of Brake (per Brake): £10.00
Set up of either front or rear brakes plus correct adjustment of cable operated brakes. This includes inspection for wear and lubrication of relevant parts. (parts extra)

Adjustment / Service of Hydraulic Brake (per Brake): £15.00
Set up of either front or rear brakes plus correct adjustment of hydraulically operated brakes. This includes a full system bleed with top-grade fluid oil and inspection for wear. (Fluid included-other parts extra)

Adjustment of Gears / Service: £10.00
Fully adjust and set up of either front or rear derailleurs. Includes a complete lubrication of the drive-train and inspection for any wear. (parts extra)

Custom Built Frame: £60.00
Build ‘from scratch’ your dream bike from your specification. All built and checked to our high standards. (parts extra)

Fork Fitting: £15.00
Fork steerer cut to exact specifications, crown race fitted, star washer fitted, then a full re-grease and set to required torque. (parts extra)

Fit New Inner Tube: £5.00
Fitting of a new inner tube and inflate to specified pressures, includes inspection for any tyre or rim damage. (parts extra)

Fit New Bottom Bracket: £15.00
Features a full bottom bracket extraction followed by cleaning and fitting of a new bottom bracket and a full re-grease. (parts extra)

Fit New Chain: £5.00
Replacement of old / worn or broken chain. (parts extra)

Fit New Chainset: £15.00
Replacement of cranks / chainrings & bearings. Includes full cleanout and degrease. (parts extra).

Fit New Free-Hub Body: £15.00
Replacement of free-hub. (parts extra)

Fit New Mech / Derailleur: £10.00
Fit new front or rear mech (derailleur) (parts extra).

Fit New Headset: £15.00
Remove existing headset and replace with new. (parts extra).

Frame Preparation Only (new and used): £25.00
Facing and reaming of head tube facing and chasing of bottom bracket. Checking for frame alignment.

Service Hub (per wheel): £15.00
Clean out - degrease - grease and replace bearings and parts where necessary. (parts extra)

Wheel Build (per Wheel): From £20.00
Features a full wheel build including lacing , truing and tensioning, of wheels to their correct specifications. (parts extra)

Wheel True: From £12.00
Features a full wheel straightening service. This includes tensioning and truing of the wheel.

All prices include V.A.T. at 17.5%.


Act Smart
Please note age restriction applies, a responsible adult must accompany anyone under 16yrs
Tracs UK Ltd, Linmere Visitor Centre, Delamere Forest, Cheshire, CW8 2JD
Tel : 07949 088477   E-Mail : info@tracs-uk.co.uk

Registered in England & Wales, Registered Office: Walker Begley Partnership, 207 Knutsford Road, Grappenhall, Warrington, Cheshire WA4 2QL, Company No. 06037204
VAT No. 920 0473 65